Children swing car connected to the power supply is not moving what are the solutions

After plugged in, the swing machine can not move, no response.

Solution: if your power supply is normal and the indicator light on the controller of the swing machine is on, remove it according to the following operation. (1) if the switch wire of the coin feeder of the toy swing car falls off, insert the switch wire of the coin feeder again;

(2) the coin comes out from the slot of the swing cart and cannot fall into the money box. Then, adjust the coin passage on the coin slot. The size can only pass the distance of one coin (up and down), or change the coin slot;

(3) swing the wire Angle on the coin feeder switch is not correct, the coin cannot hit the wire, then correct the wire, so that the coin can hit the wire.

(4) the controller of the swing machine is burnt out. After the two wires on the coin switch are directly touched, the swing machine still cannot work. Then the controller is broken and can be solved by replacing the controller.

(5) shake the car coin switch can not work, with the hand toggle wire, can not hear the sound of "di answer", then it is the swing car coin switch bad, internal short circuit, replace the coin switch.

Plug it in, and the swing starts.