How to install the rear brake of children bicycle? Wanyi bicycle co., LTD teaches you.

How to install: 1. Adjust the clearance, adjust the adjustment button on the handle, brake side, Angle, grip distance adjustment.

The clearance is the distance from the brake lever to the brake, which is too large and slow to react, too small and uncomfortable. Adjust it to feel comfortable when you pull it up. As the brake pads wear, the clearance becomes larger.

Adjust steps: turn out counterclockwise, remember to lock the fixing screw of the outer ring to the end after adjusting; But do not turn to the degree of almost rapid release, lest the risk of detachment.

You can tighten the brakes, and then tighten the screws, less likely to run away. If the brake will make a sound, can be adjusted into an octagon, that is, the gap between the rear side and the rim of about 1mm. Find a cushion, tighten the brakes, and lock.

Angle adjustment of brake lever: loosen the screw on the handle, but the handle of this car is quick-detach adjustable, so you don't need to move the screw; Correct - to maintain the extension cord of the arm; Error - level, wrist will be uncomfortable.